Mechanical Valves (V-Series)

The V-Series mechanical valves are designed to operate with a mechanical preset mechanism to effectively shut off the flow once a predetermined quantity of product has been dispensed. This preset mechanism allows the valve to be shut off mechanically in either a single-stage or two-stage process.

Single-stage cutters are typically used with slower flow rates or with more viscous products, where hydraulic shock is less of a problem.
A two-stage cutter allows the flow to be decelerated before the final cut, thereby preventing hydraulic shock.

SPECIFICATIONS:
V7:
Suitable for SM5, SM7, SMA7, M5, M7 and M10 meters.
– 2″ aluminium for classes 1, 2, 3, 4, 7, 8, 14, 15, 16, 27, 30 and 37, with Buna, PTFE or Viton seals. This angle valve is indexable in 90° positions with the valve outlet facing upwards, downwards, backwards or forwards.
– Rated for 150 PSI (10.5 bar).

V15:
Suitable for SM15, M15 and M25 meters.
– 3″ aluminium for classes 1, 2, 3, 4, 14, 15 and 16. PTFE or Viton seals.
– This angle valve can be set to 90° positions with the valve outlet facing upwards, downwards, backwards or forwards.
– Rated for 150 PSI (10.5 bar).

V30:
Suitable for SM30, M30, M40 and M60 meters.
– 4″ aluminium for classes 1, 2, 3, 4, 14, 15 and 16. PTFE or Viton seals.
– This angle valve can be set to 90° positions with the valve outlet facing upwards, downwards, backwards or forwards.
– Rated for 150 PSI (10.5 bar).